Yeti Cooling Monsters CM90-BUV, Manual

Page: 8 / 12

daIly USage of oUr Cooler IS eaSy!
on/off
Connect to the power outlet, press this
button and it will be in default COOL mode.
Press the button again to switch off the
cooler.
Cool
Press this button to set cooler in COOL
mode. The COOL display light will turn on
and the water pump will start drawing
water from the tank to kick-start the
evaporative cooling process. This will also
activate the UV lamp that disinfects the
water, resulting in cleaner air output.
Press this button again to set the machine
in WIND mode. In this mode, the water
pump will be at rest and the cooler will only
operate as a normal fan for air circulation.
UV light will turn off.
SPeed
Press this button to set the fan to desired
speeds. P1 is low speed, P2 is medium
speed, P3 is high speed.
SwIng
This button will set the vertical louvers
to oscillate left to right automatically to
alternate the propelling direction of cool air.
SleeP
Select this button to set cooler in SLEEP
mode.
The blower will repeatedly alternate
between the 3 different wind speed levels in
every 20 seconds intervals.
tIMer
When the cooler is switched off, you can
set the time (between 1 to 24 hours) for
the cooler to start up automatically.
When the cooler is switched on, you can
set the time (between 1 to 24 hours) for
the cooler to shut down automatically.