Yeti Cooling Monsters CM90-BUV, Manual

Page: 10 / 12

Only operate your cooler from a power source of the same voltage,
frequency and rating as indicated on the machine identification
marking.
Always ensure that the cooler is switched off and unplugged
from the power outlet when not in use, before assembling or
disassembling parts and before cleaning.
Ensure that the cooler is fully assembled before operating.
Always disconnect the cooler from the power source before moving
it from one location to another.
Always remember to switch off the cooler and disconnect it from the
power source before carrying out any maintenance or repair works.
The cooler should be wiped down with a piece of clean cloth at
least every week to ensure optimal cooling effect. The interior of
the cooler should be regularly cleaned, once a month at a minimum
(subjected to the exterior environment of which the product is
regularly deployed).
do’S
Do not attempt to operate the cooler if it is faulty or its cord(s) and/
or plug appears to be damaged in any way. Also avoid contact with
parts that have come loosened.
Do not wash the cooler by directing running water straight at it. You
can clean the cooler with a piece of damp cloth. In case the cooler is
wet, please do not turn on the cooler until it completely dries out to
prevent it from malfunctioning.
Do not insert any foreign objects into the air outlets when the cooler
is operating.
Do not cover the fan guard or operate the cooler in close proximity to
curtains and walls, etc. It will obstruct the air intake.
It is not advisable to operate the cooler within the immediate vicinity
of water, such as bathtubs, washbowls, swimming pools, etc., where
the likelihood of immersion or splashing is higher.
At all times, do not overturn the cooler. Upon adding water, do not tilt,
lay or move the cooler to any other position. That might cause the
water to overflow.
don’tS