background image

Refrigerants

All Models:  R-134a 

 
Compressor:

 

1/2 HP Hermetic Compressor  

Power Source:

 

120V AC 60Hz for US Models/ 

230V AC 50Hz for CE Models 

Amperage:  

RLA: 

9.3 

 

   RLA: 

 

 

 

FLA:  11.0   

 

 

FLA: 

   LRA: 

30.0 

   LRA: 

19.0 

 

 

 

 

 

Size: 

  800 

Series

   

Height:

  45 

in 

  

Width:

  19.5 

in   

Depth:

  29 

in 

  

Weight:

 

 

Maximum is deluxe unit at 225 lb. w/ Tank 

Before operating this unit, please read this man-
ual thoroughly.  You must understand the proce-
dures outlined in this manual.  Failure to follow 
these procedures could void all  warranties. 
 
Before handling refrigerants, read the material 
safety data sheet (MSDS) from the refrigerant 
manufacturer.

 

Inhalation of high concentration of refrigerant 
vapors is harmful and may cause heart          
irregularities, unconsciousness, or death.      
Deliberate inhalation of refrigerants is            
extremely dangerous.  Death can occur without 
warning.  Vapors reduce oxygen available for 
breathing and are heavier than air.  Decomposi-
tion products are hazardous.  Liquid contact 
can cause frostbite.  All refrigerant containers, 
equipment, and hoses are under pressure.

 

Model 800 Series Refrigerant Management System   

Section 

Page  Section 

Page 

Specifications  

MODE 6:  Tank Refill  

Safety Instructions 

MODE 7:  Refrigerant Management System  

Component Diagram 

Purging Non-Condensable Gases  

10 

Control Panel Overview 

Maintenance Reminders  

10 

Setup/Check List/User Options 

Filter change/compressor oil/vacuum oil 

 

MODE 1:  Recovery Only  

Troubleshooting Information  

11 

MODE 2:  Vacuum  

Common Problems  

12 

MODE 3:  Charge Only  

LCD Error Messages  

13 

MODE 4:  Full Cycle  

Repair Parts List  

14 

MODE 5:  Oil Inject 

Warranty Information 

14 

Table of Contents 

Specifications 

Summary of Contents for 39800















Reviews: