N824 User Manual
12
System Settings
This chapter explains system settings on N824. Click the main menu
on the
top of the Web GUI to check the system settings.
Network Settings
After successfully logging in the N824 Web GUI for the first time with the factory IP
address, users could go
System→Network Preferences→LAN Settings
to
configure the network for N824.
Figure 5-1 LAN Settings
Table 5-1 LAN Settings
Items
Description
DHCP
If this option is set as yes, N824 will act as DHCP client to
get an available IP address from your local network. We
don’t recommend enabling this, as without the right IP
addressyou cannot access N824.
Enable SSH
By using SSH, you can log in to N824 and run commands.
It’s disabled by default. We don’t recommend enabling it if
not needed.
Default Port: 8022.
Enable FTP
Users could log in N824 via FTP if this option is enabled.
Users could access FTP resource on N824 via Windows
