Yeastar Technology MyPBX U100, Installation Manual

Page: 40 / 197

MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 24
Figure 5-9
· Name
A name for this rule, e.g. “HTTP”.
· Description
Simple description for this rule. E.g.: Accept the specific host to access the web
interface for configuration.
· Protocol
The protocols for this rule.
· Port
Initial port should be on the left and end port should be on the right.
The end port must be equal to or greater than start port.
· IP
The IP address for this rule. The format of IP address is: IP/mask
Ex: 192.168.5.100/255.255.255.255 for IP 192.168.5.100
Ex: 216.207.245.47/255.255.255.255 for IP 216.207.245.47
Ex:192.168.5.0/255.255.255.0 for IP from 192.168.5.0 to 192.168.5.255 .
· MAC Address
The format of MAC Address is XX:XX:XX:XX:XX:XX, X means 0~9 or A~F in hex,
the A~F are not case sensitive.
Note : The MAC address will be changed when it‟s remotely device, so it will
not be working to filter using MAC for remote devices.
· Action
Accept: Accept the access from remote hosts.
Drop: Drop the access from remote hosts.
Ignore: Ignore the access.