Yeastar Technology MyPBX U100 Installation Manual Download Page 6

Page: 6 / 197

MyPBX U100 & U200 Installation Guide

http://www.yeastar.com 6/16

2.2 LED Indicators and Ports

Figure 2-3 MyPBX U100 & U200 Front Panel

Figure 2-4 MyPBX U100 & U200 Rear Panel

LED

Indication

Status

Description

Power

Power status

The power is switched on.

Off

The power is switched off.

RUN

MyPBX status

Blinking

MyPBX is running properly.

Not Blinking/Off

MyPBX goes wrong.

1-16

FXO port status

Red light

The red light is blinking: the PSTN line hasn

’

t been

Connected.
The red and green lights are blinking alternately: there
is an incoming call.
The red and green light are blinking alternately and
rapidly: the call is connected and the trunk is in use.

Summary of Contents for MyPBX U100






































































































































































































Search results

Summary of Contents for MyPBX U100

Reviews:

Related manuals for MyPBX U100

Brands by name

Popular brands

Yeastar Technology MyPBX U100, Installation Manual

Search results

Summary of Contents for MyPBX U100

Reviews:

Related manuals for MyPBX U100

Brands by name

Popular brands