Yeastar Technology MyPBX U100 Installation Manual Download Page 27

Page: 27 / 197

MyPBX U100&U200 Administrator's Guide

www.yeastar.com

Page 11

4.1.2 Trunk Status

Figure 4-2

Trunks:

VOIP Trunk

Status

Unregistered

: Trunk registration failed.

Registered

: Successful registration, trunk is ready for use.

Request Send

: Registering.

Waiting

: Waiting for authentication.

Service Provider

Status

: Successful registration, trunk is ready for use.

Unreachable

: The trunk is unreachable.

Failed

: Trunk registration failed.

FXO Trunk

Status

Idle

: The port is idle.

Busy

: The port is in use.

Disconnected

: The port hasn‟t connected to the PSTN line.

More detail message, please refer to the LED indication of front panel.

GSM/UMTS Trunk

Status

Idle

: The port is idle.

Busy

: The port is in use.

Signal

: No signal.
: Poor.
: Average.
: Good.

: Excellent.

Summary of Contents for MyPBX U100






































































































































































































Search results

Summary of Contents for MyPBX U100

Reviews:

Related manuals for MyPBX U100

Brands by name

Popular brands

Yeastar Technology MyPBX U100, Installation Manual

Search results

Summary of Contents for MyPBX U100

Reviews:

Related manuals for MyPBX U100

Brands by name

Popular brands