background image

 | Optional Accessories | 

59

Smart Noise Block

Enable/disable the base to block out/eliminate the noises when in a call.

When you make a call using WH66/WH67 via speaker mode, enable this
function can block out/eliminate the noises when there is no speech in a
call.

Default

: Off.

Note

: It appears only if Noise Suppression is enabled. It can better

eliminate environmental noise, but it may make the sound quality worse.

Hearing Protection Settings

Anti-Startle Protection

Configure which hearing protection technology to be used.

Daily Noise Exposure

Configure the daily noise exposure levels.

Optional Accessories

The base can use optional accessories when you need to extend your base's capabilities.

The following optional accessories need to be purchased separately if required for your base:

1.

Busylight BLT60

2.

BT50 (only for WH66/WH67 base)

3.

Wireless charger WHC60 (only for WH66/WH67 base)

4.

EHS60

Use the Busylight BLT60

Charge the Mobile Phone on WHC60

Related information

Connect to PC/Desk Phone/Smartphone via Bluetooth

Use the Busylight BLT60

The busylight can alert you to the status of the phone or softphone. It can only display the Presence status
of one device. If multiple devices are connected, please set the device that needs to display the Presence
status as the default audio device or outgoing dialer device.

LED States

Description

Connection Status

LED glows red, green, and blue in
sequence

Startup after the busylight is inserted into the base

Presence Status

 (only for WH66/WH67, sync status requires softphone support)

LED glows green

Available

LED glows orange

Away

LED glows red

DND/Busy

LED off

Turn off the busylight, softphone does not support

Talking Status

LED fast flashes red

Ringing

Summary of Contents for WH6 Series































































Reviews: