Yealink W59R User Manual Download Page 40 | Manualshive

Page: 40 / 47

background image

| Audio Settings |

40

Setting the Eco Mode

Using the eco mode can greatly reduce the transmission power and signal output when the handset is during a call.
The attenuation range is 20m. When the distance between the base station and the handset is over 20m, the eco mode

is disabled automatically. If the eco mode is enabled, the radio coverage of the base station will be reduced.

1.

Go to

OK

>

Settings

>

System Settings

>

Eco Mode

.

2.

Select

Change

.

Setting the Repeater Mode

Using the repeater mode can extend the radio coverage of the base station. This feature gives you more mobility in

large dwelling.
If the repeater mode is enabled, and a repeater is registered to this base station, the handset registered to the base

station can be used either within the range of the base station or the repeater. It provides users with greater freedom of

mobility.
For more information on how to use DECT repeater with the base station, refer to

Yealink DECT Repeater User

.

Repeater mode and eco mode+ features cannot be used at the same time.

1.

Go to

OK

>

Settings

>

System Settings

>

Repeater Mode

.

2.

Select a desired repeater and press

OK

.

The handset prompts whether to reboot this base station.

3.

Confirm the action.

The base station reboots to make the change take effect. The change is applied to all the handset registered to the

base station.

Related tasks

Setting the Eco Mode+

Audio Settings

You can change the basic audio settings on your phone.

Silent Mode

You can enable the silent mode if you do not want to be disturbed. The handset will not ring when receiving an

incoming call, but it will still display the incoming call information.

Switching on Silent Mode

You can silence an incoming call by switching on silence mode to stop your phone from ringing.
Long press the * key until the phone prompts “All Ring Tones Off”.

The silent icon

appears in the status bar.

Switching off Silent Mode

If you want to resume the incoming ring, you can switch off silent mode.

«
...
38
39
40
41
42
...
»

Summary of Contents for W59R
















































Reviews:

No comments

Related manuals for W59R

Brand: Handicare Pages: 56

Brand: Yealink Pages: 6

MeetingSpace VC800

Brand: Yealink Pages: 6

Brand: Yealink Pages: 16

Brand: Yealink Pages: 4

Brand: Yealink Pages: 20

Brand: Yealink Pages: 299

VC210 Teams Edition

Brand: Yealink Pages: 12

Brand: Yealink Pages: 5

Brand: Yealink Pages: 16

Brand: Yealink Pages: 30

MeetingSpace VC200

Brand: Yealink Pages: 8

MVC Series: MVC800

Brand: Yealink Pages: 16

CP930W Telesystem

Brand: Yealink Pages: 2

Brand: Yealink Pages: 16

SPACOMMAND CP3800 Series

Brand: Pentair Pages: 36

SE - 566 80 Habo

Brand: Fagerhult Pages: 6

Brand: Discount Car Stereo Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands