| Handset Registration |
15
After the handset is registered successfully, the phone prompts “Handset Subscribed” and “Base NO. (The last 4
characters of the connected Base’s MAC address)”.
After the handset initialized successfully, an icon with the internal handset number and handset name appears on the
phone screen.
Tip:
You can also press
OK
>
Register Handset
and then select the desired base to register the handset. You
need to enter the base PIN (default: 0000) after a base is found.
Related tasks
Putting the Base Station into Registration Mode
Registering a Handset to Another Base Station
You can register the handset to another base station if you want to discard the current registration.
Make sure the base station is in the registration mode.
1.
Go to
OK
>
Settings
>
Registration
>
Register Handset
.
2.
Select the desired base and then press
OK
.
The handset begins searching for the base station which is in registration mode.
3.
Press
OK
after a base is found.
4.
Enter the base PIN (default: 0000), and then press
Done
to complete the registration.
After registration, the phone prompts “Handset Subscribed” and “Base NO. (the last 4 characters of the
connected Base’s MAC address)”.
After the handset initialized successfully, an icon with the internal handset number and handset name appears on
the phone screen.
Related tasks
Putting the Base Station into Registration Mode
Possible Reasons for Registration Failure
Some scenarios may cause registration failure.
• Incorrect base PIN (check with your system administrator).
• Base station is out of range.
• Base station is not in registration mode.
Note:
If registration was not successful, the handset screen will prompt you that the registration is failed.
Selecting a Base Station to Connect
You can connect the handset to a desired base station manually, or allow the handset to connect the registered base
station with the greatest signal strength automatically.
1.
Go to
OK
>
Settings
>
Registration
>
Select Base
.
The phone screen displays all base stations that the handset is registered to and the
BestBase
option. The radio
box of the currently used base station with the last 4 characters of MAC address is marked.
2.
Select the desired base station or
BestBase
, and then press
Select
.
Summary of Contents for W59R
Page 1: ......
Page 45: ... Appendix 45 Appendix Appendix A Menu Structure ...
