Yealink W59R User Manual Download Page 39

Page: 39 / 47

| Customizing Your Phone |

Long press the # key when the handset is idle until the phone prompts you the handset is locked.

The lock icon appears in the status bar.

Unlocking Your Handset

When you need to use the locked handset, you can unlock it manually.
Long press the # key when the locked handset is idle until the phone prompts you the handset is unlocked.

The lock icon disappears from the status bar.

Locating Handsets

You can locate a misplaced registered handset using the base station.

Press

on the base station.

All the handset that registered to this base station will ring simultaneously and the screen will display the IP address

of the base station.

You can press any key on handset to stop ringing, or press

again on the base station to stop all handsets ringing.

Note:

When the handsets are not in the idle status, they will not ring simultaneously.

Renaming the Handset

The handset will be named automatically if successfully registered to the base station. You can personalize the

handset name.

Go to

Settings

Handset Name

Edit the current name in the

Rename

field.

Confirm the action.

Setting the Eco Mode+

Eco mode+ turns off the transmission power and the radio waves emitted are virtually zero when the phone is in the

standby mode.
You can enable or disable the eco mode+. If the eco mode+ is enabled, there is no signal interaction between the

handset and the base station, and the color of the signal strength indicator on the idle screen will be displayed in

green. When a call arrives or a connection occurs, the phone exits the eco mode+ automatically, and the color of the

signal strength indicator on the idle screen changes from green to white.

Go to

Settings

System Settings

Eco Mode+

Press

Change

Enter the system PIN (default: 0000) and then press

Done

The phone prompts whether to reboot the base station.

Confirm the action.

The base station reboots to make the change take effect. The change applies to all the handsets registered to the

base station. The color of the signal strength indicator on the idle screen will change from white to green.

Summary of Contents for W59R
















































Search results

Summary of Contents for W59R

Reviews:

Related manuals for W59R

Brands by name

Popular brands

Yealink W59R, User Manual

Search results

Summary of Contents for W59R

Reviews:

Related manuals for W59R

Brands by name

Popular brands