Yealink VP59 Teams, Administrator'S Manual

Page: 205 / 533

Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
202
2-Adaptive, display the customized contact avatar if it exists; otherwise, do not display
Default 1
Web UI Settings > Call Display > Contact Photo Display Mode
Parameter account.X.picture_info_enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to download the picture from the URL contained in the Call-Info
header of the INVITE message.
Format of call info:
Call-Info: <Image URL>;purpose=wallpaper
Call-Info: <Image URL>;purpose=icon
Note: If the phone receives both the call info information of "purpose = wallpaper" (wallpaper) and
"purpose = icon" (avatar) at the same time, only the wallpaper is displayed, the avatar is not displayed.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Supported
Devices
All phones except CP960
Case Scen-
ario
Get the picture from call-info and display it on the phone as the wallpaper while receiving/dialing a
call, or during a call:
Configure the call-info:
Call-Info: <http://192.168.0.1/wallpaper.jpg>;purpose=wallpaper
Set the following:
account.1.picture_info_enable = 1
Parameter phone_setting.called_party_info_display.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the local identity when it receives an incoming call.
Note: The information display method is configured by the parameter “phone_setting.call_info_dis-
play_method”.
Permitted
Values 0-Disabled
1-Enabled
Default 0
Web UI Settings > Call Display > Display Called Party Information
Parameter phone_setting.call_info_display_method <y0000000000xx>.cfg
Description
It configures the call information display method when the phone receives an incoming call, dials an
outgoing call or is during a call.
Permitted
Values
0-Name+Number
1-Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com > )