Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
463
Supported: timer
Content-Length: 0
Topic
Session Timer Configuration
The following table lists the parameters you can use to configure the session timer.
Parameter account.X.session_timer.enable
[1]
<MAC>.cfg
Description It enables or disables the session timer.
Permitted
Values
0-Disabled
1-Enabled, the phone will send periodic UPDATE requests to refresh the session during a call.
Default
0
Web UI
Account > Advanced > Session Timer
Parameter account.X.session_timer.expires
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) for refreshing the SIP session during a call.
An UPDATE will be sent after 50% of its value has elapsed. For example, if it is set to 1800 (1800s),
the phone will refresh the session during a call every 900 seconds.
Note: It works only if “account.X.session_timer.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 90 to 7200
Default
1800
Web UI
Account > Advanced > Session Expires (90~7200s)
Parameter account.X.session_timer.refresher
[1]
<MAC>.cfg
Description
It configures who refreshes the SIP session during a call.
Note: It works only if “account.X.session_timer.enable” is set to 1 (Enabled).
Permitted
Values
0-UAC
1-UAS
Default
0
Web UI
Account > Advanced > Session Refresher
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
Reboot in Talking
Reboot in talking feature allows the phones to reboot during an active call when it receives a reboot Notify mes-
sage.
Topic
Reboot in Talking Configuration
Reboot in Talking Configuration
The following table lists the parameter you can use to configure the reboot in talking.
Summary of Contents for VP59 Teams
Page 1: ......
