Yealink VP59 Teams, Administrator'S Manual

Page: 151 / 533

Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
148
Parameter voice.tone.country <y0000000000xx>.cfg
Description It configures the country tone for the phones.
Permitted
Values
Custom, Australia, Austria, Brazil, Belgium, Chile, China, Czech, Czech ETSI, Denmark, Finland,
France, Germany, Great Britain, Greece, Hungary, Lithuania, India, Italy, Japan, Mexico, New Zea-
land, Netherlands, Norway, Portugal, Spain, Switzerland, Sweden, Russia, United States
Default Custom
Web UI Settings > Tones > Select Country
Parameter voice.tone.dial <y0000000000xx>.cfg
Description
It customizes the dial tone.
tone list = element[,element] [,element]…
Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4] /Duration
Freq: the frequency of the tone (ranges from 200 to 4000 Hz). If it is set to 0 Hz, it means the tone is
not played.
Duration: the duration (in milliseconds) of the dial tone, ranges from 0 to 30000ms.
You can configure at most eight different tones for one condition, and separate them by commas. (for
example, 250/200,0/1000,200+300/500,200+500+800+1500/1000).
If you want the IP phone to play tones once, add an exclamation mark “!” before tones (for example,
!250/200,0/1000, 200+300/500,200+500+800+1500/1000).
Note: It works only if “voice.tone.country” is set to Custom.
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except CP960
Web UI Settings > Tones > Dial
Parameter features.partition_tone
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to play the different dial tones when there is no active account.
Note: It works only if “voice.tone.dial” is configured.
Permitted
Values
0-Disabled
1-Enabled. If there is an active account, the phone will play the default dial tone. If there is no active
account, the phone will play the dial tone configured by “voice.tone.dial”.
Default 0
Supported
Devices
All phones except CP960
Parameter voice.tone.secondary_dial
<y0000000000xx>.cfg
Description
It customizes the secondary dial tone.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set
it to 0.