Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
110
Description
It configures which events specified within the Event header of SUBSCRIBE or NOTIFY request
should be validated.
If it is left blank, all events will be validated.
Permitted
Values
A valid string
Default
Blank
USB Port Lock
You can lock the USB port on Yealink phones.
The following features are not available when you disable the USB port:
l
USB camera for video calls on VP59/T58A - no near-site video
l
USB recording
l
USB flash drive
l
USB headset
l
USB charging devices on CP960
l
Using Handsets with VP59/T58A Phones
Topic
USB Port Lock Configuration
The following table lists the parameters you can use to configure the USB port lock.
Parameter static.usb.power.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the USB port.
Note: For T58A phones, this parameter only applies to the rear USB port; for VP59 phones, this para-
meter only applies to the side USB port. So if you want to disable all USB ports for the VP59/T58A
phones, you need to set "static.usb.power.enable" and "static.camera.function.enable" to 0 (Disabled).
Permitted
Values
0-Disabled, the phone does not provide power to the USB port and not detect USB devices attached
to the USB port.
1-Enabled
Default
1
Parameter static.usbdisk.function.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the USB flash drive feature.
Note: It works only if "static.usb.power.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone cannot detect the USB flash drive attached to the USB port. Users cannot tap
USB item in the control center to access the File Manager.
1-Enabled
Default
1
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Summary of Contents for VP59 Teams
Page 1: ......
