Yealink Telkom W52P User Manual Download Page 79

Page: 79 / 92

Call Features

Follow the voice prompt from the system server to listen to your voice mails.

You can also listen to the voice mail by pressing to enter the Messages & Calls
screen. Select the desired line and press the Select soft key.

Note

Voice Mail Tone

You can enable or disable the phone to play a warning tone when receiving a voice
mail. Voice mail tone is enabled by default.

To configure the voice mail tone via web user interface:

Click on Phone->Features.

Select the desired value from the pull-down list of Voice Mail Tone.

Click Confirm to accept the change.

Note

Before listening to the voice mails, make sure the voice mail access code has been

configured.

When all new voice mails are retrieved, the

icon will disappear from the screen.

Voice mail tone is configurable via web user interface only.

Summary of Contents for Telkom W52P





























































































Search results

Summary of Contents for Telkom W52P

Reviews:

Related manuals for Telkom W52P

Brands by name

Popular brands

Yealink Telkom W52P, User Manual

Search results

Summary of Contents for Telkom W52P

Reviews:

Related manuals for Telkom W52P

Brands by name

Popular brands