manualshive.com logo in svg

Yealink Telkom W52P, User Manual, Page: 60 / 92

Share
Download
Yealink Telkom W52P User Manual Download Page 60

User Guide for the W52P IP DECT Phone 

46

 

2.

 

Select            ->System Settings->Base Reset. 

3.

 

Enter the system PIN (default: 0000). 

4.

 

Press the Done soft key. 

All individual settings of the base station will be reset to factory defaults. The power 
indicator LED and network status LED on the base station slow flash in sequence 
during the resetting process. Indicator LEDs on the base station illuminate solid 
green after startup. 

Note 

You can trigger the auto provisioning process using the wizard. After you enter the user 
name and password in the wizard and confirm to perform an update, the base station 
tries to connect the RPS (Redirection and Provisioning Service) server. If the base station 
successfully connects the RPS server, the RPS server will respond the base station with 
the URL for downloading the configuration files. Then the base station will try to perform 
auto provisioning. Contact your system administrator for the user name and password 
used to connect the RPS server. 

To trigger the auto provisioning process: 

1.

 

Press          to enter the main menu. 

2.

 

Select            ->System Settings->Auto Provision. 

3.

 

Enter the system PIN (default: 0000) and press the Done soft key. 

4.

 

Enter the valid value in the Username field and press the OK soft key. 

5.

 

Enter the valid value in the Password field and press the OK soft key. 

The LCD screen prompts “Update now?”. 

6.

 

Press the Yes soft key to perform an update or press the No soft key to cancel. 

Eco mode+ turns off the transmission power and the radio waves emitted are 
virtually zero when the phone is in the standby mode. If the eco mode+ is 
enabled, and there is no signal interaction between the handset and the base 
station, the color of the signal strength indicator on the idle screen will display in 
green. When a call comes in or a connection occurs, the phone exits the eco 
mode+ automatically, and the signal strength indicator on the idle screen 
changes from green to white. 

To configure eco mode+: 

1.

 

Press          to enter the main menu.   

Base station reset may take a few minutes. Do not power off until the base station starts 
up successfully. 

Summary of Contents for Telkom W52P





























































































Reviews:

No comments