Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
60
Parameters
Permitted Values
Default
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Type (Static
IP)->Sec.DNS
To configure the IP address mode via web user interface:
1.
Click on
Network
->
Basic
.
2.
Select desired value from the pull-down list of
Mode(IPv4/IPv6)
.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4.
Click
OK
to reboot the phone.
To configure a static IPv4 address via web user interface:
1.
Click on
Network
->
Basic
.
2.
In the
IPv4 Config
block, mark
the
Static IP Address
radio box.
3.
Enter the desired values in the IP Address, Subnet Mask, Default Gateway, Primary DNS
and Secondary DNS fields.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5.
Click
OK
to reboot the phone.
To configure the IP address mode via phone user interface:
Summary of Contents for SIP-T54S
