Yealink SIP-T54S, Administrator'S Manual

Page: 586 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
560
Procedure
Send user=phone can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure send user=phone feature
on a per-line basis.
Parameter:
account.X.enable_user_equal_phone
Web User Interface
Configure send user=phone feature
on a per-line basis.
Navigate to
:
http://<phoneIPAddress>/servlet?p
=account-adv&q=load&acc=0
Details of the Configuration Parameter:
Parameter Permitted Values Default
account.X.enable_user_equal_phone
0 or 1 0
Description:
Enables or disables the IP phone to add “user=phone” to the SIP header of the INVITE
message for account X.
0
-Disabled
1
-Enabled
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Web User Interface:
Account->Advanced->Send user=phone
Phone User Interface:
None
To configure send user=phone feature via web user interface:
1.
Click on
Account
->
Advanced
.
2.
Select the desired account from the pull-down list of
Account
.