Yealink SIP-T54S, Administrator'S Manual

Page: 640 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
614
4.
Select the desired ring tone from the pull-down list of
Ring Type for BLF Pickup
.
5.
Click
Confirm
to accept the change.
To select a ring tone for BLF pickup via web user interface:
1.
Press
Menu
->
Basic
->
Sound
->
BLF Ring Type
.
2.
Press or to select the desired ring tone.
3.
Press the
Save
soft key to accept the change.
BLF LED Mode
BLF LED Mode provides five kinds of definition for the BLF/BLF List key LED status. As there is
no hard line key on SIP-T48G/S IP phones, BLF LED mode configuration is only applicable to
SIP-
T54S/T52S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P)
E2 IP phones. BLF LED mode is also applicable to the expansion module EXP50 (connected to
SIP-T54S/T52S IP phones), EXP40 (connected to SIP-T48G/T48S/T46G/T46S IP phones), EXP20
(connected to SIP-T29G/T27P/T27G IP phones). The following table lists the LED statuses of the
BLF key when BLF LED Mode is set to 0, 1, 2, 3 or 4 respectively. The default value of BLF LED
mode is 0.
BLF LED mode feature is also applicable to BLF list key. For more information on BLF List key,
refer to
Busy Lamp Field (BLF) List on page 635 .
Line key/Expansion Module Key LED
(configured as a BLF key or a BLF List key and BLF LED
Mode is set to 0)
LED Status Description
Solid green The monitored user is idle.
Fast-flashing red (200ms) The monitored user receives an incoming call.
Solid red
The monitored user is dialing.
The monitored user is talking.
The monitored user’s conversation is placed on hold (This
LED status requires server support).
Slow-flashing red (1s) The call is parked against the monitored user’s phone