Yealink SIP-T54S, Administrator'S Manual

Page: 122 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
96
To configure SLAAC feature via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
ICMPv6 Status
block, select the desired value from the pull-down list of
Active
.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4.
Click
OK
to reboot the phone.
To configure IPv6 address assignment method via phone user interface:
1.
Press
Menu
->
Advanced
(default password: admin) ->
Network
->
WAN Port
.
2.
Press or to select
IPv4 & IPv6
or
IPv6
from the
IP Mode
field.
3.
Press or to highlight
IPv6
and then press the
Enter
soft key.
4.
Press or , or the
Switch
soft key to desired IPv6 address assignment method
from the
Type
field.
If you select the
Static IP
, configure the IPv6 address and other network parameters in the
corresponding fields.
5.
Press the
Save
soft key to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6.
Click
OK
to reboot the phone.
To configure static DNS when DHCP is used via phone user interface:
1.
Press
Menu
->
Advanced
(default password: admin) ->
Network
->
WAN Port
->
IPv6
.
2.
Press or , or the
Switch
soft key to select the
DHCP
from the
Type
field.
3.
Press or , or the
Switch
soft key to select
Enabled
from the
Static DNS
field.
4.
Enter the desired value in the
Pri.DNS
and
Sec.DNS
field respectively.