Getting Started
19
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv4 address via phone user interface:
1.
Press Menu->Settings->Advanced Settings (Default password: admin)
->Network->WAN Port.
2.
Press to select IPv4 and press the Enter soft key.
3.
Press to select Static IPv4 Client and press the Enter soft key.
4.
Enter the desired values in the IPv4 Address, Subnet Mask, Default Gateway,
Primary DNS and Secondary DNS fields respectively.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv6 address via phone user interface:
1.
Press Menu->Settings->Advanced Settings (Default password: admin)
->Network->WAN Port.
2.
Press to select IPv6 and press the Enter soft key.
3.
Press to select Static IPv6 Client and press the Enter soft key.
4.
Enter the desired values in the IPv6 IP, Prefix, Default Gateway, Primary DNS and
Secondary DNS fields respectively.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready for use. If your phone is not
registered, you may have to register it. For more information on how to register your
phone, refer to
Account Registration
on page
49
.
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.
