Link CX-24 User’s Manual
Version 1.0
Page 19
February 2004
YDI disclaims any liability or responsibility for the results of improper or unsafe installation practices.
This device is to be exclusively used for fixed point-to-point operation with directional antennas.
Before you continue with this installation, make sure you have a filled-out copy of the Radio Link Planning
Worksheet found in Section 2.8.
Note:
The Link CX-24 electronics have been designed to be maintenance free, and the outdoor
components are very rugged. However, because of continued exposure to weather, it is
recommended that qualified personnel inspect antenna systems once a year to verify proper
installation, maintenance, and condition of equipment.
2.9.2 Equipment and Unpacking
Each Link CX-24 radio is shipped with the Link CX-24 User’s Manual and mounting hardware. Unpack
each box and examine the exterior of each unit for any visible damage. If visible damage is detected,
immediately contact your sales representative or YDI Customer Support.
2.9.3 Packing Lists and Orderable Parts
Each packing carton is accompanied by a packing list. Verify the contents of the carton against the
packing list. Regardless of the packing list parts described here, the shipped packing list is binding. Note
the warranty sticker on the Link CX-24. The Link CX-24 radio is sealed at the factory. Tampering with
these seals voids the warranty.
See Table 2.3 for a high-level description of the orderable parts, and see Figure 2.3 for a picture of the
orderable Link CX-24 parts.
YDI suggests that the user retain at least one (1) of each packing carton with all its packing materials. In
the event that it is necessary to return a unit, the user will have the required packing material for safe
shipment.
