INPUT
OUTPUT
MM
MC
RCA
MC
HIGH MC
V
Hz
W
N
2
Designed in France
H e r i t a g e P H
100
P H O N O P R E A M P L I F I E R
R
L
Discovering your PH100: Front view
MC
MM
1
ON/OFF switch: Use this button to switch ON or switch OFF your PH100.
2
1
2
Discovering your PH100: Back view
1
2
3
3
4
3
5
2
3
6
Ground. This is a terminal that allows the tone arm shield cable to connect directly to the chassis of
the PH100 to eliminate any radio interference or hum from the signal.
2
1
2
Moving Coil (MC) input: Connect here if you are using a moving coil cartridge.
2
4
2
3
Moving Magnet (MM) input: Connect here if you are using moving magnet cartridge.
2
5
MC Selector switch - if using MC or High Output MC this toggle switch must be set to the correct
position. If using only a moving magnet cartridge there is no need to change the switch.
6
Power inlet: Use the mains cable provided with your PH100. Be sure the switch is in OFF position
before plugging or unplugging the mains cable.
Input selector: Use to select between different cartridge types - MM or MC.
RCA output: Connect the RCA outputs of your PH100 to the RCA inputs of your preamplifier or
integrated amplifier .... (for example Heritage A100 or Heritage A200)
Heritage PH100 Phono Preamplifier
Page 6
www.ybahifi.com
