11
O R I G I N A L I N S T R U C T I O N S
GB
PRODUCT CHARACTERISTICS
The mixer is a power tool that enables quick and accurate mixing of mortars, paints, adhesives and other liquid building materials.
The speed control and the possibility to replace the agitator ensure easy adjustment of the working characteristics to the mixed
mass. The correct, reliable and safe operation of the tool depends on its proper use, therefore:
Read and keep this entire manual before the
fi
rst use of the tool.
The tool supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
speci
fi
ed in this manual.
ACCESSORIES
The product is delivered as complete, however, the assembly steps described in the further part of this manual must be carried out
before the start of work. A universal agitator is supplied with the product. Mixer YT-82881 is delivered without battery and charger.
TECHNICAL PARAMETERS
Parameter
Unit
Value
Catalogue No.
YT-82880, YT-82881
Rated voltage
[VDC]
18
Rated speed
[min
-1
]
0 - 650
Agitator mounting thread size
M14
Max. agitator diameter
[mm]
110
Weight
[kg]
2.0
Noise level
- sound pressure L
pA
± K
[dB(A)]
79 ± 3
- power L
wA
± K
[dB(A)]
90 ± 3
Vibration Level a
h
± K
[m/s
2
]
4.76 ± 1.5
Rechargeable battery type
Battery capacity*
[Ah]
2
Charger*
Input voltage
[V~]
220 – 240
Power frequency
[Hz]
50/60
Rated power
[W]
60
Output voltage
[VDC]
21
Output current
[A]
2.4
Charging time**
[h]
1
* only for models equipped with a battery and charger
** the speci
fi
ed charging time applies only to the battery with the capacity listed in the table
The declared noise emission values have been measured using the standard test method and can be used to compare one tool
to another. The declared noise emission values can also be used for preliminary exposure assessment.
Warning! Noise emissions during the correct operation of a power tool may di
ff
er from the declared values depending on the
manner in which the tool is used, in particular the type of the workpiece.
Warning! Operator protection measures must be determined based on an approximation of exposure under current conditions of use.
All stages of the work cycle must be taken into account. In addition to the working time, other factors must be taken into account,
such as the time when the tool is switched o
ff
and when it is idle.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci
fi
cations provided with this power tool.
Failure to do so may
result in electric shock,
fi
re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean.
Disorder and poor lighting can be causes of accidents.
