5. ADJUSTMENTS UPON INSTALLATION
(Cent’d)
Upon installation , make adjustments in reference to the
adjustment procedures given. in the table below.
Table 5.1
Adjustment Procedures
No.
Procedure
Remarks
1
Check the interior and exterior of the control cabinet.
2
Check screw terminals for tightness.
3 Connect external cables and check.
4
Connect the power input cable.
Check connector and module locations to be sure of
positive connections.
6
Check settings.
Check input power supply voltage and frequency.
I
Check that the composite power supply unit outputs are
not short-circuited.
9
Check the output voltages after initially applying power.
Check the 1/0 signals between the NC unit and the
machine tool.
Check parameters and setting data.
12
Perform a second power application.
13
Check to be sure the emergency stop functions.
14
Check movement on each axis by manual feed.
m
15
Adjust the servo system.
16 Check that all NC functions operate successfully.
Summary of Contents for YASNAC i80
