manualshive.com logo in svg

YASKAWA VS MINI J7 series, Instruction Manual

Share
Download
YASKAWA VS MINI J7 series Instruction Manual Download Page 7

7

WARNING

(Ref. page)

• For 400V class, make sure to ground the supply neutral.
• Make sure to ground the ground terminal 

 according to the 

local ground code.

Failure to observe this warning can result in electric shock 
or fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39

CAUTION

(Ref. page)

• Verify that the inverter rated voltage coincides with the 

AC power supply voltage.

Failure to observe this caution can result in personal injury 
or fire.

• Do not perform a withstand voltage test of the inverter.

It may cause semi-conductor elements to be damaged.

• Make sure to tighten terminal screws of the main circuit 

and the control circuit.

Failure to observe this caution can result in a malfunction, 
damage or a fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42

• Never connect the AC main circuit power supply to output 

terminals U, V and W.

The inverter will be damaged and void the warranty.  . . . . . . . . . . . . . . . . . . .  42

• Do not connect or disconnect wires or connectors while 

power is applied to the circuit.

Failure to observe this caution can result in personal injury.

• Do not change signal/control wiring during operation.

The machine or the inverter may be damaged.

All manuals and user guides at all-guides.com

Summary of Contents for VS MINI J7 series























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands