YASKAWA Varispeed G7, Modbus Communication Manual

Page: 66 / 92

66
Table 4.10 “H” Parameters
Access
Name Address
Digital Operator Display
Text
Data Range Unit Default
During
Run
V/f
V/f
w/PG
OLV FV OLV2
0h Frequency Bias
1h Frequency Gain
2h
Auxiliary Reference 1
(Replaces D1-02)
3h
Auxiliary Reference 2
(Replaces D1-03)
4h Voltage Bias
5h Accel/Decel Gain
6h DC Injection Braking Current
7h
Overtorque/Undertorque
Detection Level
8h
Stall Prevention During Run
Level
9h Reference Lower Limit
Ah Jump Frequency
Bh PID Feedback
Ch PID Setpoint
Dh Frequency Bias 2
Eh Motor Temperature
10h Forward Torque Limit
11h Reverse Torque Limit
12h Regenerative Torque Limit
13h Torque Reference
14h Torque Compensation
15h Torque Limit
H3-05 0414h
Analog Input Terminal A3
Function Selection
1Fh
Not Used
(Set for Network Use)
1 02h - - - - -
H3-06 0415h Terminal A3 Gain 0.0 ~ 1000.0 % 0.1 % 100.0 % R A A A A A
H3-07 0416h Terminal A3 Bias -100.0 ~ 100.0 % 0.1 % 0.0 % R A A A A A
0 0-10 VDC
1 -10 +10 VDC
H3-08 0417h
Analog Input Terminal
A2 Signal Type Selection
(Set Switch S1-2 Also)
2 4-20 mA
1 2 A A A A A
H3-09 0418h Terminal A2 Selection 0 See H3-05 1 0h A A A A A
H3-10 0419h Terminal A2 Gain 0.0 ~ 1000.0 % 0.1 % 100.0 % R A A A A A
H3-11 041Ah Terminal A2 Bias -100.0 ~ 100.0 % 0.1 % 0.0 % R A A A A A
H3-12 041Bh
Analog Input Filter Time
(Applies to A1, A2, and A3)
0.00 ~ 2.00 Sec
0.01
Sec
0.03 Sec A A A A A
1 Frequency Reference
2 Output Frequency
3 Output Current
5 Motor Speed
6 Output Voltage
7 DC Bus Voltage
8 Output Power (kW)
9 Torque Reference
15 Terminal A1 Level
16 Terminal A2 Level
17 Terminal A3 Level
18 Motor Secondary Current
19 Motor Excitation Current
20 Soft Starter (SFS) Output
21 ASR Input
22 ASR Output
24 PID Feedback
26 Voltage (Vq) Reference
H4-01 041Dh
Analog Output Terminal FM
Function Selection
27 Voltage (Vd) Reference
1 02h - - - - -