Installation and Operation Guide SOLECTRIA XGI 1000
DOCR-070733-F (2/22/2021)
Page 24 of 78
Install Wiring Box
NOTICE !
Never Leave Wiring Box Installed without a Power Head: The Wire Box is not designed to be installed without the
Power Head. Leaving the Wire Box installed without the powerhead will lead to water ingress, which is not
covered under warranty.
Place the Wire Box onto the Mounting Bracket and align the PEMs on the Wire Box with the clearance holes on the
Mounting Bracket as shown in Figure 3-8. Use two (2) M6 x 1.0, 12mm screws to secure it in place, torque the screws to
40 in-lbs. (4.5 N-m) using a 10mm socket.
Figure 3-8 M6 Connecting Bolt (Right Side Shown)
Install one (1) M6 x 1.0, 12mm screw in the bottom of the Wire Box for the external auxiliary equipment grounding
connection, as shown in Figure 3-9. If this connection will have a conductor landed, leave screw finger tight,
otherwise torque to 40 in-lbs. (4.5 N-m) using a 10mm socket.