YASKAWA
SIEP C730600 86F MECHATROLINK-II Technical Manual
13
2.
Put the LED label (B) in the appropriate position on the drive front cover (A).
A - Drive front cover
B - LED label
Figure 5.3 Put the LED Label on the Drive Front Cover
3.
Insert the option card (A) into the CN5-A connector (C) on the drive and use the included screws (B) to put
it in place.
A - Option
B - Included screws
C - Connector CN5-A
Figure 5.4 Insert the Option
4.
Connect one end of the ground wire (C) to the ground terminal (B) using one of the remaining provided
screws (D). Connect the other end of the ground wire (C) to the remaining ground terminal and installation
hole on the option (A) using the last remaining provided screw (D).
• Tighten the screws to 0.5 to 0.6 N•m (4.4 to 5.3 in•lb).
A - Option
B - Drive grounding terminal (FE)
C - Ground wire
D - Included screws
Figure 5.5 Connect the Ground Wire
