background image

iv

179394-1CD

HW1483905

MFL15D-875/-1600

We suggest that you obtain and review a copy of the ANSI/RIA National 
Safety Standard for Industrial Robots and Robot Systems (ANSI/RIA 
R15.06-2012). You can obtain this document from the Robotic Industries 
Association (RIA) at the following address:

Robotic Industries Association

900 Victors Way

P.O. Box 3724

Ann Arbor, Michigan 48106

TEL: (734) 994-6088

FAX: (734) 994-3338

www.roboticsonline.com

Ultimately, well-trained personnel are the best safeguard against 
accidents and damage that can result from improper operation of the 
equipment. The customer is responsible for providing adequately trained 
personnel to operate, program, and maintain the equipment. NEVER 
ALLOW UNTRAINED PERSONNEL TO OPERATE, PROGRAM, OR 
REPAIR THE EQUIPMENT!

We recommend approved YASKAWA training courses for all personnel 
involved with the operation, programming, or repair of the equipment.

This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to part 15 of the FCC rules. These limits 
are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio 
communications.

4 of 74

Summary of Contents for MOTOMAN-MFL15D-875











































































Reviews: