5-6
167646-1CD
HW1481264
5
I/O Signal Allocation
5.1 I/O Module Setting
Interface Board for Welding
Power Supply
11. Select the allocation mode to set up.
– Select {AUTO} to allocate I/O signal allocation automatically.
Select {MANUAL} to allocate I/O signal allocation manually.
– The selected allocation mode is set up.
12. Select {DETAIL} of {EXTERNAL IO ALLOCATION}.
– When select {AUTO}, the following procedures No.13 to 15 are not
necessary. Operate the procedure from No.16.
– When select {MANUAL}, operate the following procedures No.13 to
15 accordant with the setting manually.
NOTE
The IO allocation of the XEW board and the YEW board
cannot be changed even if select the {MANUAL} in the
allocation mode.
The error [ERROR 8230: Cannot change the setting for
XEW or YEW board.] occurs if attempt to change.
27 of 40
