There is the possibility to fix the assignment of electronic and terminal module. Here
coding pins (order number 000-0AC00) from VIPA can be used. The coding pin consists
of a coding jack and a coding plug. By combining electronic and terminal module with
coding pin, the coding jack remains in the electronic module and the coding plug in the
terminal module. This ensures that after replacing the electronics module just another
electronic module can be plugged with the same encoding.
Each electronic module has on its back 2 coding sockets for coding jacks. Due to the
characteristics, with the coding jack 6 different positions can be plugged, each. Thus
there are 36 possible combinations for coding with the use of both coding sockets.
1.
Plug, according to your coding, 2 coding jacks in the coding sockets of your elec-
tronic module until they lock
2.
Now plug the according coding plugs into the coding jacks.
3.
To fix the coding put both the electronic and terminal module together until they lock
CAUTION!
Please consider that when replacing an already coded electronic module,
this is always be replaced by an electronic module with the same coding.
Even with an existing coding on the terminal module, you can plug an
electronic module without coding. The user is responsible for the correct
usage of the coding pins. VIPA assumes no liability for incorrectly
attached electronic modules or for damages which arise due to incorrect
coding!
Coding
VIPA System SLIO
Basics and mounting
Mounting periphery modules
HB300 | CP | 040-1CA00 | en | 18-28
17
