![background image](http://html1.mh-extra.com/html/yardline/westmont-gable-12-x-16/westmont-gable-12-x-16_manual_3178981016.webp)
14
PARTS REQUIRED:
FINISH
You have fi nished rafter jig. Proceed to assemble your rafters.
RAFTER ASSEMBLY
144-3/4"
(367,7 cm)
CLA x2
3" (7,6 cm)
x4
x2
CLA
2 x 4 x 4-7/8" (5,1 x 10,2 x 12,4 cm)
BEGIN
¸
1
Secure one
CLA
fl ush to the fl oor deck using two 3" screws
(Fig. A)
.
Measure over 144-3/4" and install a second
CLA
fl ush to the fl oor deck.
Secure using two 3" screws.
Fig. A
It is very important to assemble your rafters using the following method for an even and fl at roof.
You will build a rafter jig using the fl oor and two
CLA
parts as shown.
(2) 3" (7,6 cm)
Screws
in each
CLA
Attach CLA on 16' wide side of fl oor.
16' wide side of fl
oor.
Flush
Flush