![background image](http://html1.mh-extra.com/html/yardline/westmont-gable-12-x-16/westmont-gable-12-x-16_manual_3178981043.webp)
Set gable end wall on fl oor and secure top and bottom
of wall using one 2" screw into top and bottom plates
(Fig A)
.
1
41
GABLE END WALL - A INSTALLATION
3" (7,6 cm)
2" (5,1 cm)
x27
2" (5,1 cm)
x2
x1
x13
1-1/2" (3,8 cm)
PARTS REQUIRED:
3" (7,6 cm)
x12
It is important to secure the gable end wall
in the following order:
ENSURE TOP OF WALL FRAMES ARE FLUSH.
2
Nail lower edge of panels to fl oor using 2" nails 6" apart.
Angle nail to hit fl oor frame
(Fig. B)
.
ENSURE GABLE AND EAVE WALL PANELS
ARE FLUSH BEFORE SECURING.
You have fi nished standing your gable end wall.
FINISH
Secure gable wall to fl oor using 3" nails
(Fig. C)
.
Nail gable wall panel to eave wall stud
using 1-1/2" nails 6" apart
(Fig. C)
.
3
4
6"
(15,2 cm)
Flush
Fig. A
Fig. B
2" (5,1 cm)
Nail
Angle nail to hit
fl oor frame.
Secure gable wall top frame 2 x 4 using one 3" screw
toe-screwed into eave wall frame at an angle as
shown
(Fig. D)
.
6"
(15,2 cm)
3" (7,6 cm)
Nails
1-1/2"
(3,8 cm)
Nails
Fig. D
3" (7,6 cm)
Screw
BEGIN
Stand gable end wall on fl oor.
2" (3,8 cm)
Screw
2"
(5,1 cm)
Screw
Fig. C
Flush
2" (5,1 cm)
Nails
2"
(5,1 cm)
Screw
Flush