51
PARTS REQUIRED:
ROOF PANELS
NOTE: Measurement from outside of gable.
24"
(61 cm)
24"
(61 cm)
32-3/4"
(83,2) cm)
3/4"
(1,9 cm)
Gauge
Block
Fig. A
5/8"
(1,6 cm)
GAP
Fig. D
5/8"
(1,6 cm)
GAP
Fig. D
Flush
2" Nails
Fig. F
Place a
48" x 80"
upper roof
panel with the rough side up
and flush to lower panels.
Ensure 5/8" gap at gable end
overhang
(Fig.D)
and 3/4"
measurement on the rafter
(Fig. A)
.
Secure the lower edge of roof
panel using two 2" nails in
corners as shown.
Move up to the top of the panel
and keep spacing between the
center of the rafters
(Fig. F)
.
Secure with one 2" nail into
each rafter
(Fig. F)
.
Place another
48" x 80"
upper
roof panel, rough side up and
flush with the installed
48" x 80"
panel
(Fig.C)
.
Ensure 5/8" gap at gable end
overhang
(Fig.D)
.
Secure the lower edge of roof
panel using two 2" nails in
corners as shown.
Move up to the top of the panel
and keep spacing between the
center of the rafters
(Fig. F)
.
Secure with one 2" nail into
each rafter
(Fig. F)
.
5
6
Flush
Fig. C
Two Nails
NAIL
FIRST
Flush
Two Nails
NAIL
FIRST
7/16
x 48
x 80"
(1,1
x 121,9
x 203,2
cm)
7/16
x 48
x 80"
(1,1
x 121,9
x 203,2
cm)
161-1/4"
(409,6)
cm)
MAINT
AIN
RAFTER
TO RAFTER
DIMENSION