Page of 17
13
Step 15: Install Front Corner Braces
Install the Front Corner Braces (#18)
to the corners of the Front Panel and
the Side Panels using 4 (#29) Bolts, 4
(#6) Washers, and 4 (#7) Nuts for
each Front Corner Brace. See Figure
15.
Hardware Needed for Step 15:
2 (#18) Front Corner Braces
4 (#29) Bolts
4 (#6) Washers
4 (#7) Nuts
Final Step: Attaching Tail Gate with Latches
First attach the two Tailgate Latches(#24) to the inside
of the Tailgate(#20) using 4 (#29) Bolts, 4 (#6)
Washers, and 4 (#7) Nuts for each Tailgate Latch(#24).
Next, insert the Tailgate Pins(#26) into the holes on the
bottom part of the Tailgate. See Figure 16 for Tailgate
Pin locations. Secure Tailgate Pin(#26) by adding 2
(#25) Washers and 2 (#33) Nuts to the Pin threads.
Next, put the Tailgate in place on the Trailer Cart.
Position Tailgate so the two Tailgate pins line up with
the two holes on the Rear Cross Brace (#22). The
Tailgate latches can be dropped over the open slots on
the Side Panels that lock the Tailgate into place.
Assembly is complete.
Before using the cart,
check that all hardware connections are tight.
Hardware Needed for Step 16:
1 (#23) Tailgate
2 (#24) Tailgate Latches
2 (#26) Tailgate Pins
4 (#6) Washers
4 (#7) Nuts
4 (#29) Bolts
2 (#25) Washers
2 (#33) Nuts
Summary of Contents for FC-10
Page 5: ...Page of 17 5 Hardware...
