Page of 17
6
ASSEMBLY
Step 1:
Attaching Front Cross Brace
Position the two Bottom Panels (#27) as shown in Figure 1 below.
Attach the Front Cross Brace (#31) to the Bottom Panels using 4 (#29)
Bolts, 4 (#6) Washers, and 4 (#7) Nuts.
Hardware Needed for Step 1:
1 (#31) Cross Brace
4 (#29) Bolts
4 (#6) Washers
4 (#7) Nuts
2 (#27) Bottom Panels
Step 2: Connecting Bottom Panels
Attach Bottom Panels (#27) as shown in Figure
2, using 2 (#29) Bolts, 2 (#6) Washers, and 2
(#7) Nuts.
SKIP
the two middle bolt connections
until Step #5, when attaching the Wheel Axle
Support.
Hardware Needed for Step 2:
2 (#27) Bottom Panels
2 (#29) Bolts
2 (#6) Washers
2 (#7) Nuts
Summary of Contents for FC-10
Page 5: ...Page of 17 5 Hardware...