Yanmar ZT350 series, Installation Manual

Page: 69 / 80

PRE-DELIVERY
ZT350 Installation Manual 6-3
Pre-Delivery Preparation
12/05
© 2007 Yanmar Marine International
Check the Power Trim Pump Fluid
NOTICE: ALWAYS check the oil level with
stern-drive in the full DOWN / TRIM-IN position.
1. Place the stern-drive in full Down / TRIM-IN
position.
2. Observe the oil level in the reservoir. The oil
level should be maintained within the MIN and
MAX lines on the reservoir
(Figure 6-2, (2)) .
Figure 6-2
Figure 6-2
1 – Reservoir
2 – MIN and MAX Lines
3. The oil level is low if it is below the MIN line
(Figure 6-3, (1)) on the reservoir. Fill as
necessary with the specified fluid. See Fill the
Power Trim Pump Fluid on page 6-4 .
Figure 6-3
Figure 6-3
1 – MIN Line
0006012
(1)
(2)
000601 3
(1)