Yanmar ViO12-2A, Service Manual

Page: 240 / 409

6. HYDRAULIC SYSTEM
6-
9-
14
Procedure
(13) Install springs 22 and pins 23 into valve housing 15.
(14) Install inner face seal 24 and outer face seal 25 to balanc-
ing plate 26.
(15) With the notches of balancing plate 26 fitted with pins 23 ,
install balancing plate 26 into valve housing 15.
(16) Install O-rings 28 and 29 to valve housing 15 , and then,
install valve housing 15 onto valve 27.
Notes :
a) Install the valve housing onto the valve while pressing bal-
ancing plate 26 with a thin rod such as a screwdriver
inserted into the port hole in the valve housing, to prevent
the balancing plate from coming off.
b) Align the drain holes in the valve housing and the valve
plate.
15
23
15
23
Outer face seal Inner face seal
Balancing plate
24
25
26
24
25
26
Valve housing
Outer face seal
Balancing plate
Inner face seal
Pin
15
29
27
26
28
Drain hole
15
29
27
26
28