Yanmar 6SY Series, Operation Manual

Page: 116 / 128

PERIODIC MAINTENANCE
108
6SY Operation Manual
1. Disconnect the negative cable (-) first
from the battery (ground cable).
2. Disconnect the positive cable (+) last
from the battery (cable connected to
starter motor).
3. Remove the battery and dispose of
properly.
Install the Battery
1. Install the new battery.
2. Connect the positive cable (+) to the
battery (cable connected to starter
motor).
3. Connect the negative cable (-) last to
the battery (ground cable).
Note: Be careful not to short circuit the
battery.
Check for Leakage of Fuel,
Engine Oil and Engine Coolant
Visually check the engine for fuel, engine
oil or engine coolant leakage.
CAUTION
• ALWAYS be environmentally
responsible.
• Follow the guidelines of the
EPA or other governmental
agencies for the proper
disposal of hazardous
materials such as engine oil,
diesel fuel and engine coolant.
Consult the local authorities or
reclamation facility.
• NEVER dispose of hazardous
materials irresponsibly by
dumping them into a sewer, on
the ground or into ground
water or waterways.
• Failure to follow these
procedures may seriously
harm the environment.
0000013en
A
WARNING
ENTANGLEMENT
HAZARD!
• Stop the engine before you
begin to service it.
• NEVER leave the key in the key
switch when you are servicing
the engine. Someone may
accidentally start the engine
and not realize you are
servicing it. This could result
in a serious injury.
• If you must service the engine
while it is operating, remove all
jewelry, tie back long hair, and
keep your hands, other body
parts and clothing away from
moving / rotating parts.
• Failure to comply could result
in death or serious injury.
0000010en