31
VT2500
6. Machine adjustment
077
078
⑦
④
⑤
6.11 Presser foot stopper collar adjustment
Loosen the screws ③ and adjust the height of the
presser foot stopper collar ② so that the gap
between the presser bar bushing ① and the collar
② is 0.3 mm when the presser foot is at the
topmost position.
6.12 Detaching/reattaching presser foot
Detaching
(1)
Loosen the screw ④.
(2) Press the lifter lever ⑥ downward and detach
the presser foot ⑤.
Reattaching
(1)
Press the lifter lever ⑥ downward, and insert
the presser foot ⑤ into the presser bar ⑦.
(2) Position the presser foot ② as explained in
"6.10 Presser Foot Position Adjustment" (page
30), and tighten the screw ④.
Stitch plate
076
8mm
③
②
①
0.3mm
⑥