![background image](http://html.mh-extra.com/html/yamato/vt2500/vt2500_instruction-manual_905410014.webp)
7
VT2500
2. Installation
Turn off the power switch of the motor and check the
motor has stopped before hanging or replacing the
belt. If not, hands or clothing may become entangled
whereby resulting in injury.
CAUTION
2.4 Hanging belt
10 - 20 mm slack
012
013
②
①
③
(1)
Hang the belt ① around the machine pulley ②.
(2)
While turning the machine pulley ②, hang the
other end of belt ① around the motor pulley
③.
(3)
Stretch the belt so that the belt has a 10 to
20 mm slack when a force of about 10 N (1.02
kgf) is applied to the center of the belt.
(4)
Once the belt is sufficiently taut, securely lock the
motor pulley.
* H o w t h e m o t o r i s l o c k e d d o w n d i f f e r s
depending on motor, therefore see the
instruction manual of the motor.
SUPPLEMENT
Semi-submerged installation of the machine requires
the supplementary belt cover to be installed before the
machine is mounted on the table and the belt is hanged
in place. See page 8.
②
①