8
VT2500
2. Installation
2.5 Belt cover installation
● Turn off the power switch of the motor and check
the motor has stopped before installing the belt
cover. Working with the power on can result in
injury.
● Install the belt cover without fail.
If the belt cover is not installed, hands, clothing or
the stitched fabric may become entangled in the belt
resulting in injury or damage.
CAUTION
016
⑤
014
④
015
017
(1)
Insert the screws ② halfway into the oil
reservoir ①.
(2)
Fit the holes on the supplementary belt cover
③ over the heads of the screws ②, slide the
cover to the rear and tighten the screws ②.
(3)
Attach the belt cover(lower) ④ to the sewing
machine with the screws ⑤.
(4)
Fit the belt cover(upper) ⑥ onto the belt
cover(lower) ④ and lock in place with the
screws ⑦.
③
②
①
②
③
⑥
⑦
④