17
VT2500
5. Proper operation
Raising the presser foot activates the tension
release. This makes it easier to pull out the thread.
● Turn off the power switch of the motor and
check the motor has stopped before threading.
Working with the power on can result in injury.
● Incorrect threading can cause skip stitch, thread
breakage, and uneven stitch.
5.4 Threading
Thread as explained in Fig. 037.
If already threaded, tie them with new sewing
threads.
<A: Needle threads>
Pull the thread knots to the front of needles,
cut the knots off and rethread through the
needles.
<B: Top cover thread>
Pull the thread until the knot comes out.
<C: Looper thread>
Pull the thread until the knot comes out, then
cut the end with scissors.
CAUTION
SUPPLEMENT
A
B
C
037
①
SUPPLEMENT
If the needle threads
need to be tightened,
p a s s t h e t h r e a d s
t h r o u g h h o l e s a s
shown in figure 038.
038
SUPPLEMENT
Pulling the thread take-up eyelet holder
① to the front makes it easier to thread
the looper thread. Once threaded, press
on the thread take-up eyelet holder until
hearing it catch in its original position.