YCO-1111-03-13
DP-6200
Operation Manual
11
The scale can check various functions automatically. When a problem is detected, the following mes-
sages will be displayed. If you take the steps described below but the problem is not fixed, the scale
needs to be calibrated or serviced by a qualified scale technician. Please contact your scale dealer.
VI Troubleshooting and Error Messages
The batteries are running low.
When the batteries are run-
ning low, this indicator will come on. Replace all of the batteries
with new ones.
The batteries are low.
When the batteries are too low for ac-
curate operation, this indication will be displayed and the scale
may automatically power off. The batteries must be replaced to
use the scale.
Weight out of range high.
When the weighed value is 6 or
more divisions heavier than the scale’s capacity this message
will be displayed. Remove the excess weight from the scale
platform.
Weight out of range low.
When the weighed value is a few
divisions below calibrated zero, this message will be displayed.
It is usually displayed when the platform is removed or has
something wedged under it. Place the platform on the platform
support or remove any objects wedged under the platform
Initial error on startup, high.
When the initial weight is
heavier than the permissible zeroing range and the
ON
key is
pressed, this message will
be displayed. Remove whatever is
on the platform and press the
ON
key again.
Initial error on startup, low.
When the initial weight is lighter
than the permissible zeroing range and the
ON
key is
pressed, this message will be displayed. It is usually displayed
when the platform is removed or has something wedged under
it. Place the platform on the platform support or remove any
objects wedged under the platform, and press the
ON
key
again.
Weighing sensor error
. When the weight detecting circuitry
registers an error, this message will
be displayed. Turn the
power off and then on again.
lb
