YCO-1111-03-13
DP-6200
Operation Manual
7
Turning the Scale On and Off
Remove everything from the platform surface and press the
ON
key. The display will briefly flash
all segments of the LCD. After approximately 5 seconds, the display will stop flashing and auto
-
matically set to zero. Press the
OFF
key to turn the scale off.
Checking the Battery Level
Turn the scale on and push the
T
key while the display is flashing. The remaining battery life
will be displayed. The more “o”s that appear, the more life there is left in the batteries. After a few
seconds, the scale will start normally.
Zero the Display
The scale will zero automatically when turned on. If a value is displayed when the platform is
empty, push the
ON
key to zero the display. The maximum zero range during power up is ap-
proximately ± 1.9% of the scale capacity.
Switching Units
To switch between kilogram and either pound, ounce or pound-ounce units, press and hold the
NET
GROSS
key and press the
T
key.
The CAL Indicator
If the CAL indicator is visible, the DP‑6200 has not been configured to be sealed for legal for trade
use. System parameter 40 must be set to 003 for all legal for trade applications. For instructions on
changing the system parameters, please see section IV Changing the Scale Setup in the DP-6200
Technical Manual.
IV Directions for Use
