33
User Parameter List
NO. ITEM
VALUE
DEFAULT FUNCTION
REMARKS
001
DISPLAY BRILLIANCE
000:
002
VERY DIM
001:
DIM
002:
STANDARD
003:
BRIGHT
004:
VERY BRIGHT
002
DIMMER TIMER
000:
010
DIMMER OFF
001-006:
PERIOD BEFORE RETURN TO BRILLIANCE 00
003
000:
000
NO BEEP
001:
BEEP AT UNDERWEIGHT
002:
BEET AT ACCEPTABLE WEIGHT
003:
BEEP AT OVERWEIGHT
004:
BEEP AT UNDER & OVERWEIGHT
004
000:
000
JUDGE IRRESPECTIVE OF STABILITY
001:
JUDGE ONLY IN STABILITY
JUDGMENT
005
AUTOMATIC TOTALIZATION
000:
000
ADD IRRESPECTIVE OF JUDGED RESULT
001:
ADD ONLY ACCEPTED JUDGMENT
006
MANUAL TOTALIZATION
000:
000
[+], [-] KEYS INVALID IN AUTOMATIC MODE
001:
[+], [-] KEYS VALID IN AUTOMATIC MODE
007
NON-ADDITION
000:
000
TOTALIZE
001:
NO TOTALIZATION, DATA OUTPUT ONLY
([TOTAL] KEY DOES NOT WORK.)
008
PRINTER, JPS-508
000:
001
PRINTER JPS-508 NOT USED
001:
NET WEIGHT PRINTED
002:
GROSS, TARE AND NET WEIGHT PRINTED
003:
DO NOT SET
004:
OVER AND SHORT PRINTED (TO BE SET #68=1)
009
PRINT ITEM
000:
003
CODE NO. AND MEASUREMENT TIMES NOT PRINTED
001:
CODE NO. PRINTED
002:
MEASUREMENT TIMES PRINTED EVERY WEIGHING
003:
CODE NO. & MEASUREMENT TIMES PRINTED
004-007:
DO NOT SET
010
PRINT TIME AND DATE
000:
002
TIME AND DATE NOT PRINTED
001:
TIME PRINTED EVERY WEIGHING
002:
DATE PRINTED AT TOTALIZATION
003:
DATE PRINTED AT TOTALIZATION AND TIME PRINTED
EVERY WEIGHING
004:
DATE PRINTED EVERY WEIGHING
005:
TIME AND DATE PRINTED EVERY WEIGHING
011
FEED AFTER PRINT
000:
000
NO PAPER FEED
001-020:
FEED SPECIFIED LINES AFTER WEIGHING
012
FEED AFTER TOTAL PRINT
000:
006
NO PAPER FEED AFTER TOTAL PRINT
001-20:
FEED SPECIFIED LINES AFTER TOTAL PRINT
031
NOT USED
000
DO NOT CHANGE
033
TIMING OF LOW-LOW LIMIT
000:
000
NO SIGNAL SENT
For relay output
(VALID AT #175=27)
001-200:
LOW-LOW LIMIT SIGNAL SENT AT THE TIMING OF
[Lower limit] - [Specified Division]
035
"SEnd" DISPLAY TIME
000:
001
NO "SEnd" DISPLAYED AT ADDITION
PRINTER TPS-503W
001-008:
"SEnd" DISPLAYED FOR SPECIFIED SECONDS AT ADDITION
053
LCD CONTRAST
000-255:
125
VERY DIM TO VERY BRIGHT
054
LCD DISPLAY AT
000:
5601: 000 SETTING VALUES DISPLAYED
OVER/UNDER FUNCTION
001:
5602: 002 SWEEP BAR + SETTING VALUES DISPLAYED
002:
SWEEP BAR + SHORTAGE GUIDANCE DISPLAYED
003:
SETTING SHORTAGE GUIDANCE DISPLAYED
055
DEFINITION OF
LCD SWEEP BAR
000:
005
ONE BAR STANDS FOR 5 DIVISIONS
001-050:
BY SPECIFIED DIVISION
056
LED BRIGHTNESS OF
000:
000
25% (DIM)
JUDGMENT LAMP
001:
50%
002:
75% (BRIGHT)
058
AUTO POWER ON
000:
000
NOT POWER ON AT PLUG IN
001:
POWER ON AT PLUG IN
059
AUTO CALL AT POWER ON
000:
000
NO FUNCTION
001:
CALL #1 DISPLAYED AUTOMATICALLY AT POWER ON
060
AUTO ADDITION MODE AT
000:
000
MANUAL ADDITION MODE AT POWER ON
POWER ON
001:
AUTO ADDITION MODE AT POWER ON
061
AUTO CANCEL OF TARE
000:
000
NO FUNCTION
001:
TARE CANCELED WHEN G/W IS LESS THAN 4 DIVISIONS
002-003:
NOT USED
Adjust the brilliance of the
display.
UPPER AND LOWER LIMIT
BUZZER
DETECTING STABILITY OF
UPPER AND LOWER LIMIT
Summary of Contents for DP-5602
Page 2: ......
Page 10: ...6 Display and operation key sections ...
