20
Shortage guidance display function
Shortage guidance display function
With this function, the high and low limits as well as the weight per work unit are specified in advance in
order to display the remaining number of items in work unit (insufficient number of items) that must be
measured before being acceptable. When a specific number of items must be measured, the under/over
judgment function was used until now to display the weight shortage. Items to be weighed were added on
or removed from the platform of the instrument while the number was determined to be appropriate. In
contrast, since this function displays the remaining amount in work unit (insufficient number of items)
instead of weight shortage, the operator only needs to load or unload the insufficient number of items to
reach the appropriate amount, thus leading to substantial improvement in the work efficiency.
How to make the settings
Setting the user parameter No. 187 to “1” enables the shortage guidance display function.
For how to change the user parameter, refer to page 33.
For setting the high and low limits, refer to pages 18.
Note: When the shortage guidance display function is enabled, the PCS mode cannot be used.
In addition, the
key is assigned to switch between the WT mode and the shortage guidance
display function.
How to set the weight per work unit (individual weight)
(where the weighing capacity is 30 kg and the scale division is
0.01 kg)
1. Setting by sample weighing
<< Example >> When the weight of 50 samples is 0.50 kg:
Operating procedure
Panel display
Remarks
Press the
key.
Pressing the key proceeds to
the sample weighing setting.
* To change the work unit, do
it before setting the individual
weight, by referring to the
next page.
Place 50 samples on the
platform of the scale.
“0.50 kg” appears at the total
weight (GROSS).
Press the
and
keys in that order.
Press the
key.
The individual weight is set to
0.01 kg.
The individual weight set
here can be displayed by
setting the parameter No. 70
or 71 to “12.”
Summary of Contents for DP-5602
Page 2: ......
Page 10: ...6 Display and operation key sections ...
