57
5. Handling precautions
Warnings and Cautions
1. Never use any explosive or flammable substances.
Never process any explosive, flammable samples and also samples contained with those
substances. It will cause fire/explosion. (See Chapter 13. List of dangerous materials on page
76.)
2. Take extreme care when using a resin container.
Be sure to check the withstand temperature before using a resin container. Using such a
container under a temperature beyond its withstand temperature will melt resin and a fire or an
explosion may result.
3. Turn the ELB off when an abnormality occurs.
Turn immediately off Earth Leakage Breaker (ELB) of this Equipment and disconnect Power
Cord/Power Cable from receptacle or switch board of facilities,
if
smoke or strange smell is
generated from it by any chance.
Contact with local dealer or Yamato sales office and/or Yamato Customer service Center and
ask them to inspect it. If nothing is done to it, fire or electrical shock may result.
Never repair it by customer themselves to avoid any dangers.
。
4. Do not put any foreign objects in the unit.
Never insert any metal or easily flammable objects into the openings in the
chamber (radiation port, cable port, etc.). A fire, an electric shock or burning may
result.
If a foreign object has entered inside, immediately turn the ELB off and ask your
dealer, one of our sales offices or the customer service center for inspection.
Leaving as it is will cause a fire or an electric shock.
5. Take extreme care for handling of samples after operation at a higher temperature.
Take care not to touch samples when taking them in or out since inside the
chamber, internal wall of the door or samples are still hot for some time after
operation at a higher temperature. Be sure to put on heat-resistance gloves and
take extreme care for burning when handling samples.
6. Take extreme care when opening the door during operation at a higher
temperature.
When you attempt to open the door during operation at a higher temperature, never touch the
door since the internal chamber or the inside of the door are hot.
When the door is opened, the heater and the fan motor will stop for safety but note that the fan
motor will keep rotating from inertial and hot air will be blown out.
Note that if a fire alarm is installed around the unit, it may go off erroneously.
7. Never attempt to touch hot surfaces.
Never touch the door, the cable port, suction port or around the exhaust port (optional) during
or immediately after operation. They are hot and may cause burning.
8. Do not climb on the Equipment.
Do not climb on this Equipment. May cause personal injury and/or its failure by tipping it over
and being damaged.
